Figure 11-7 Packet Filter Show Command Example - ZyXEL Communications ALC1224 User Manual

ALC1224 User's Guide
where
<slot-port>
<all|tag>
This command sets a port to accept either all Ethernet frames or just those that have a VLAN tag.
The following example sets ADSL port 1 on the line card in slot 3 to only accept Ethernet frames with VLAN tags.
ras> lcman port frametype set 3-1 tag
11.3.13 Packet Filter Show Command
Syntax:
lcman port pktfilter show <slot>
where
<slot>
This command displays the line card's packet type filter settings.
The following example displays the packet type filter settings for the ALC1224 in slot 5.
ras> lcman port pktfilter show 5
[slot5 (alc-71)]
port pktfilter
---- -----------------------------
1 accept-all
2 accept-all
3 accept-all
4 accept-all
5 accept-all
6 accept-all
7 accept-all
8 accept-all
9 accept-all
10 accept-all
11 accept-all
12 accept-all
13 accept-all
14 accept-all
15 accept-all
16 accept-all
17 accept-all
18 accept-all
19 accept-all
20 accept-all
21 accept-all
22 accept-all
23 accept-all
24 accept-all
11-10
= The number of the slot where the ALC1224 is located and the number of
an ADSL port.
= Type
all
VLAN tags. Type
with VLAN tags.
= The number of the slot where the ALC1224 is located.

Figure 11-7 Packet Filter Show Command Example

to have the line card accept Ethernet frames with or without
to have the line card only accept Ethernet frames
tag
ADSL Port Commands