Hyundai TQ8-AN240DKAN User Manual page 31

Operating...the...CD...Player
About...CD...Player
Precautions...upon...handling...discs...
After using a disc, keep it in the original case
●
to prevent it from becoming scratched,
which may cause the CD to make popping
sounds.
Do not use heart-shaped discs, octagon-
●
shaped discs, or any other abnormally
shaped disc. Such discs may be the cause of
malfunctions.
Do not clean discs with chemical solutions
●
such as record sprays, antistatic sprays, anti-
static liquids, benzene, or thinners. Such
materials may cause the surface of DISC to
be unrecoverable.
Do not expose the disc to direct sunlight for
●
prolonged periods of time. Such exposure
may lead to disc deformation.
Dust, scratch, and other substances may
●
cause popping sound while playing as well
as sound deterioration.
Never place paper on either side of the disc
●
or write on disc surfaces. Sharp writing
utensils and inks used in felt-tip pens may
cause damage to disc surfaces
Clean fingerprints and dust off the signal
●
surface (coated side) of the disc with a soft
cloth.
Only soft cloths should be used as there are
no grooves for dust to get in as is the case
with LPs.
Copy-protected CDs such as S-type CDs
●
may not function in the device.
DATA CDs are not supported by the device.
●
(However, such discs may operate abnor-
mally.)
For...safe...and...efficient...operation
Do not disassemble the CD Player for repair
●
purposes. Contact your place of purchase in
the case of malfunction. (Complete service
assistance will not be provided if the user
disassembles the device.)
Do not use water to clean the device.
●
Exposure to water may cause damage to
the device.
Be cautious not to introduce foreign sub-
●
stances into the disc insert slot.
Foreign substances may cause damage to
the interior of the device.
The device may fail to operate properly in
●
extremely hot or cold temperatures.
Discontinue the use of the device unless
normal temperature is maintained.
( The operational temperature range is:
-10 ℃ ~ 65 ℃ ).
Steam can be condensed on the fiberoptic
●
lens due to rain, wet conditions, or upon
operating the heating system.
Skipping may occur to the audio when driv-
●
ing on bumpy roads for prolonged periods
of time or upon severe shock to the vehicle.
Do not use chemical solvent to clean the
●
device. Such solvents may cause damage to
the surfaces of the device.
Always use a clean and dry cloth.
PRE-OVERVIEW 2-13