Table of Contents
Advertisement
PART 2 AUDIO...SYSTEM
The previous screen will be restored and the
selected channel will begin playing.
INFORMATION
To prevent inputting a channel which exceeds
the channel range, numbers which cannot be
inputted are set to disabled state.
Voice...Command
1.
Press the
key on the steering wheel
remote controller.
2.
After the beep sound, say a command.
"Channel<0 to 255>"
Storing...XM...preset
1. Select the desired channel.
broadcast channel], page 2-7.
2. Press the preset button for over 0.8 second.
The frequency will be saved along with
beep sound.
2-12
INFORMATION
Six preset frequencies each for XM1/ XM2/
XM3 modes can be stored using the above
instructions.
Scanning......XM...broadcast...channel
1. Press the
Scan
S CAN (under 0.8 second): scans all channels
●
for 5 seconds each if in channel mode. If in
category mode, scans all channels within
the current category for 5 seconds each.
Voice...Command
1.
Press the
remote controller.
[Selecting XM
2.
After the beep sound, say a command.
"Scan"
PRESET SCAN (over 0.8 second): scans the 6
●
preset channels within the current band for
5 seconds each.
button.
key on the steering wheel
Voice...Command
1.
Press the
key on the steering wheel
remote controller.
2.
After the beep sound, say a command.
"Preset Scan"
1.
P ress the
Scan
button again to continue
playing the channel. The scan will be termi-
nated and the current channel will continue
to be played.
INFORMATION
W hen scanning has completed an entire
●
revolution, the scan function is automatical-
ly terminated and the previous played chan-
nel will be restored.
C hannel 0 is the radio ID and contains infor-
●
mation required for XM Activation.
Advertisement
Chapters
Table of Contents
