Table of Contents
Advertisement
3
P rogram Service name : displays the pro-
gram service name if data is being broad-
cast.
4
F requency : displays the current playing
frequency.
P rogram type name : displays the program
5
type name if data is being broadcast.
6
R adio Text : displays the radio text infor-
mation if data is being broadcast.
F requency Bar : displays the position of
7
the current frequency within the total fre-
quency range.
8
C urrent time : displays the current time
manually automatically according to the
GPS time.
a
Preset
buttons : the desired frequency
can be preset and selected.
[Storing FM/AM preset], page 2-4.
b
R-Text
ON/OFF button : turns the Radio
Text information on and off.
INFORMATION
If the
R-Text
is on OFF state, text will not be
displayed even if there is text being transmit-
ted from the broadcast station.
R-Text
If the
is on ON state, the frequency
bar will not be displayed. Even if the
in on ON state, text may not be displayed if
text is not being received from the broadcast
station.
c
Auto Store
button : searches the 6 fre-
quencies with the most superior reception
and automatically stores as preset buttons
in corresponding order.
[Storing FM/AM preset], page 2-4.
d
Scan
button : scans all frequencies or
just the preset frequencies for 5 seconds
each.
[Scanning FM/AM broadcast
frequency], page 2-5.
e
Sound
button : adjusts the FAD/BAL,
BASS/MID/TREB controls.
[Sound setting], page 1-12.
Selecting...FM/AM...broadcast...frequency
There are 3 ways to select the broadcast fre-
quency - (a) selecting through preset, (b)
selecting through SEEK, (c) selecting through
manual search.
R-Text
(a)...Selecting...a...frequency...through...preset
Press the preset button of the desired broad-
cast frequency.
INFORMATION
P ress the
∧
or
●
wheel remote controller shortly. The preset
frequencies of the current band will be select-
ed in order.
T here are 6 preset frequencies each for FM1,
●
FM2, and AM modes.
[Storing FM/AM preset], page 2-4.
Voice...Command
1.
Press the
key on the steering wheel
remote controller.
2.
After the beep sound, say a command.
"Preset <1 to 6>"
"Preset Up"
"Preset Down"
∨
key on the steering
PRE-OVERVIEW
2-3
Advertisement
Chapters
Table of Contents
