Garmin GNS 530 Manual page 26

DA 40 AFM
DEFAULT NAV PAGE
During most flights, the default NAV, map and NAVCOM pages will be the primary
pages used for navigation. The default NAV page displays a 'look ahead' map, a
graphic course deviation indicator (CDI), the active leg of your flight plan (as defined
by the current 'from' and 'to' waypoints), and four user-selectable data fields. The
default settings for these fields are distance to waypoint (DIS), desired track (DTK),
ground speed (GS) and estimated time en route (ETE).
From the default NAV page, simply rotate the small right knob (12) to display the map
page and again to display the NAVCOM page. The NAVCOM page displays the
available frequencies (communications and navigation) for the departure airport, any
en route airports which are included in your flight plan, and the final destination
airport. When using the direct-to function, frequencies will be listed for the airport
nearest to your starting position and the destination airport.
To display the frequency list for the desired flight plan or direct-to airport:
1. Push the small right knob (12) to activate the cursor on the airport
identifier field (in the GPS window).
2. Rotate the small right knob (12) to display the list of airports
(departure, arrival and en route) for your flight plan or direct-to.
Continue to rotate the small right knob (12) until the desired airport is
selected.
3. Press ENT to display the frequency list for the selected airport.
Doc. # 6.01.01-E Rev. 0 01 Dec 2001
Supplement A21
GNS 530
Page 9 - A21 - 25