Advertisement
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49)
set iptype X
Set how PA168V FXS gateway gets relevant network parameters.
X ranges from 0 through 3. 0: authorize users to set IP address,
subnet mask and router IP address of PA168V manually; 1: use
DHCP mode. With this system, 2: use PPPoE mode. Those ADSL
and Cable Modem users please select this item. 3: use modem
mode. Those who use PA168V with modem please set the value
as 3.
set pppid XXX
With iptype set as 2, use this command to set user name of
PPPoE; with iptype set as 3, use this command to set user name
of dial-up network.
set ppppin XXX
With iptype set as 2, use this command to set user name of
PPPoE; with iptype set as 3, use this command to set user name
of dial-up network.
set ip XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set IP address of
PA168V FXS gateway.
set subnetmask XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set subnet mask of
PA168V FXS gateway.
6
Advertisement
