Page 2
If you type super password, then you will see: Password : ******** P:\> The above information indicates that PA168V FXS gateway is under setting mode, and then you can set the PA168V FXS gateway by using the telnet commands. PA168V Telnet Commands Explanation Command...
Page 3
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) Supply command name and parameters Display basic parameters of the PA168V FXS gateway Set parameters of the PA168V FXS gateway store Save current settings to designated position load Load designated settings to current position...
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) Command Syntax description: No optional parameter of keywords Usage: Display basic parameters of the PA168V FXS gateway Relevant usage: None Detailed description: Display basic running parameters of the PA168V FXS gateway. Input ordinary password without debug being set as 0[disable],...
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) upgradeaddr [empty] sntpip 0.0.0.0 daylight 0[disable] timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi] Input ordinary password with debug set as 0[disable], and the following information will be seen: PA168X V1.49 settings Password:**** P:\>get ***************Network Settings*************** iptype 0[static] ip 192.168.1.100...
Page 6
Set how PA168V FXS gateway gets relevant network parameters. X ranges from 0 through 3. 0: authorize users to set IP address, subnet mask and router IP address of PA168V manually; 1: use DHCP mode. With this system, 2: use PPPoE mode. Those ADSL and Cable Modem users please select this item.
Page 7
With iptype set as 0, use this command to set IP of backup DNS server. set mac XX-XX-XX-XX-XX-XX Set MAC address of the PA168V FXS gateway. Parameter xx-xx-xx-xx-xx-xx must be an HEX number. set codec1 X Set the priority 1of the audio compression algorithm.
Page 8
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) Set the priority 3 of the audio compression algorithm. X ranges from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc; 6: null. set codec4 X Set the priority 4 of the audio compression algorithm.
Page 9
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) Enable/disable AEC. X ranges from 0 through 1: 0: disable AEC; 1: disable AEC. set audioframes X Set audio frames in RTP package. X is Arabic numerals between 0 and 7. With G.7231 codec selected; set...
Page 10
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) set dual modes prefix XX When IP first is set in the dual modes setting, setting switches to PSTN prefix;XX ranges from 0 through 99. set service type X Enable/disable the prepaid and service system .choose the repaid server provider.
Page 11
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) the log in server and IP phone in the same LAN, or the log in system supports the IP phone working behind the LAN; 1: Use NAT traversal. When the login system does not support IP...
Page 12
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) set domain XXXXXXXXXX Set the domain name; Value xxxxxx must be an Arabic numeral and no longer than 32 characters. set registerport XXXX Set register port. XXXX is range from 1024 through 65535. default value is 2427.
Page 13
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) set superpassword XXXX Set super password of the PA168V FXS gateway. XXX must be ASCII characters. set debug X Set open debugging message output grade for special tool. X ranges from 0 through 5: 0: close debugging output; 1: output the operation information to the window;...
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49) Set IP address of time server. set daylight X Set to use daylight or not. X ranges from 0 through 1: 0: do not use daylight; 1: use daylight. set timezone XX Set time zone.
Relevant usage: None write Command Syntax description: No keyword and parameter Usage: Save the configuration and restart the PA168V FXS gateway. Relevant usage: None gateway Note All the Telnet commands of PA168V FXS should be written in low case...