Advertisement
PA168V MGCP FXS Gateway Telnet Setup Guide (V1.49)
the log in server and IP phone in the same LAN, or the log in
system supports the IP phone working behind the LAN; 1: Use
NAT traversal. When the login system does not support IP
phone working behind the LAN, With this item selected, please
make port mapping on NAT device
set nataddr XXXXX
When "nattraversal" is set to "1"; set IP address of NAT device
wan
www.showmyip.com
NOTE The free service list of Internet：www.ip-calculator.com; www.ipchicken.com;
www.ipchicken.com;www.showmyip.com;www.whatismyip.com;
www.myipaddress.com; www.whatismyipaddress.com; ip.sbbs.net;
www.whatismyipaddress.net;checkip.dyndns.org
set natttl XX
Set NAT TTL XX is an integer between 10 and 65535 sec. default
value is 20 sec.
set phonenumber XXXXXXXX
Set a local ID of PA168X IP phone. Value xxxxx must be an Arabic
numeral and no longer than 16 characters.
set endpointid XXXXXX
Set the endpoint id; Value xxxxxx must be an Arabic numeral and
no longer than 32 characters.
port
or
URI
of
etc.) in Internet.
free
assistant
service
(Such
as
11
Advertisement
