Page 2
If you type super password, then you will see: Password : ******** P:\> The above information indicates that PA168V FXS gateway is under setting mode, and then you can set the PA168V FXS gateway by using the telnet commands. PA168V Telnet Commands Explanation Command...
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) Supply command name and parameters Display basic parameters of the PA168V FXS gateway Set parameters of the PA168V FXS gateway store Save current settings to designated position load Load designated settings to current position...
Page 4
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) Command Syntax description: No optional parameter of keywords Usage: Display basic parameters of the PA168V FXS gateway Relevant usage: None Detailed description: Display basic running parameters of the PA168V FXS gateway. Input ordinary password without debug being set as 0[disable],...
Set how PA168V FXS gateway gets relevant network parameters. X ranges from 0 through 3. 0: authorize users to set IP address, subnet mask and router IP address of PA168V manually; 1: use DHCP mode. With this system, 2: use PPPoE mode. Those ADSL and Cable Modem users please select this item.
Page 7
With iptype set as 0, use this command to set IP of backup DNS server. set mac XX-XX-XX-XX-XX-XX Set MAC address of the PA168V FXS gateway. Parameter xx-xx-xx-xx-xx-xx must be an HEX number. set codec1 X Set the priority 1of the audio compression algorithm.
Page 8
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc; 6: null. set codec2 X Set the priority 2 of the audio compression algorithm. X ranges from 0 through 6: 0: g729; 1:g7231; 2: g711u; 3: g711a; 4: gsm; 5: ilbc;...
Page 9
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) set vad X Enable/disable VAD. X ranges from 0 through 1: 0: disable VAD; 1: enable VAD. set agc X Enable/disable AGC. X ranges from 0 through 1: 0: disable AGC; 1: enable AGC.
Page 10
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) Set initial volume of handset. X ranges from 0 through 15. set handsetout X Set initial volume of handout. X ranges from 0 through 31. set dualmode X to enable or disable the PSTN line.
Page 11
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) example, the area code of Beijing is 10; the area code of Shanghai is 21, and the area code of Chengdu is 28, etc. Parameter xxx must be an Arabic numeral and no longer than 3 characters.
Page 12
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) With innerline set as 1[enable], please set the prefix to pick up inner line, such as 0. set callwait X Set whether to use call wait. X ranges from 0 to 1: 0: do not use call wait;...
Page 13
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) Set the ring seconds before the phone answers the call automatically or forward the calls. X is ranges from 0 through 60. set digitmap X Set whether to use digitmap. X ranges from 0 to 1: 0: do not use digitmap;...
Page 14
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) 7: use dda service; 8: use vida service; 9: use Smartcon’s service; 10: use avtech’s system; 11: use Ringtec’s system; 12: use citron’s system; 13: use asiasoft’s system; 14: use txtc’s system;...
Page 15
Set NAT TTL XX is an integer between 10 and 65535 sec. default value is 20 sec. set phonenumber XXXXXXXX Set a phone number of PA168V FXS gateway. Value xxxxx must be an Arabic numeral and no longer than 16 characters. set account XXXXXX While calling card is set, set the account of the chosen card;...
Page 16
0 through 224. set localtype X This command is to set how PA168V FXS gateway logs in gatekeeper. X ranges from 0 through 6: 0: use phone number as E.164 and H323 ID to login the GK; 1: use phone number as E.164 and designated H323 ID by setting account XXX command;...
Page 17
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) authentication account and pin. set dtmf X Set DTMF relay type. X ranges form 0 through 2: 0: inband audio; 1: H245 string;2: Q931 keypad. set superpassword XXXX Set super password of the PA168V FXS gateway.
Page 18
PA168V H323 FXS Gateway Telnet Setup Guide (V1.60) set upgradeaddr HTTP://XXX.XXX.XXX.XXX:PORT FTP://XXX.XXX.XXX.XXX: PORT TFTP://XXX.XXX.XXX.XXX: PORT Set IP address or domain name of upgrade server supplying upgraded program and configurations of PA168X IP phone. set sntpip XXX.XXX.XXX.XXX Set IP address of time server.
Relevant usage: None write Command Syntax description: No keyword and parameter Usage: Save the configuration and restart the PA168V FXS gateway. Relevant usage: None gateway Note All the Telnet commands of PA168V FXS should be written in low case...