Table of Contents
Advertisement
Appendix D:
Board ID
Two KE-USB36 devices may be connected to the same machine.
Each KE-USB36 unit has a two position jumper which may be used
to identify the unit as #0 (primary) or #1 (secondary). BoardID is
0 or 1 based on the 2 position jumper setting on the board. ID 0
= Jumper Open (default). This jumper is located near the middle
of the KE-USB36 board and is the only 2 position jumper on the
unit (see figure 15).
Figure 15 - Location of two position BoardID
jumper.
16
Advertisement
Table of Contents
