General Toolsmart Instruction Manual page 6

Taking a Picture for Multimeter
1
From the dashboard, tap
the camera button in the
bottom center of the
screen to access the
camera.
2
You could elect to take a
new photo or choose
one from your phone's
gallery.
3
When taking a photo, tap the circular
capture button on the bottom center
of the screen. If necessary, tap the
lightning bolt button in the top left
corner of the screen to adjust the
camera's flash. Tap the flip camera
button in the top right corner of the
screen to activate the front facing
camera ("selfie mode").
4
Finally choose whether to
keep the photo that was
taken or retake a new photo
by tapping one of those
options in the bottom corners
of the screen.