Table of Contents
Advertisement
5.2.5 ADDITIONAL MESSAGES RECEIVED DURING INCOMING CALL STATE
During these states, additional messages can be received, depending on network capacities and depending on
network services activation. Such messages include:
• Call is a diverted one (the call was for another user and is diverted to you),
• Call divert is active (the network informs you the call diverting service is active),
• Call is transferred (the call is a call that the calling user transfers to you).
These information are displayed in an information screen displayed briefly while the call is waiting/ringing. Such
a screen is given here:
Incoming call screen:
The line used for the call is given in the screen.
John
The right softkey allows to stop the ring.
L2
No Ring
Incoming call screen:
If the call is a diverted one or r is a transfered one, the incoming call screen displays also
Diverted call
information about this.
The display switches between all these information with the same global screen structure
L2
No Ring
Press on
Accepts the call
SEND
The incoming call identification is added to the "Received calls list
following information, when available: caller phone number or name (if found in Phonebooks).
In the case of a waiting call, softkeys are used as normal instead of
call management.
In case of several information displayed in the incoming call screen, the switch timing is 2
seconds.
L2
Connected call screen:
See description in next section
John
00:00:10
Names
Menu
.
CONFIDENTIAL
or
to manage the call as normal
SEND
END
Mitsubishi Electric
" automatically, with the
and
keys for
SEND
END
Page 49/102
Advertisement
Table of Contents
