Table of Contents
Advertisement
7.
USING THE VOICE MAIL
7.1
VOICE MAIL CONFIGURATION
7.1.1 PRESENTATION
The Services/Voicemail/Number and Services/Voicemail/Alert menu items allow to configure the voice mail phone
number and the voice mail alert mode. These settings relate to the current DCS line in use.
The voice mail phone number is defined as follows:
• If the SIM card includes a file for voice mail numbers storage, this file content is used as voice mail phone
numbers,
• Otherwise, the voice mail phone number is stored in the phone non-volatile memory. This field remains
unchanged even if the SIM has a voice mail phone number defined. This field has to be edited before usage. The
SIM can contain a voice mail phone number for each line.
The voicemail alert mode allows setting on or off an audio signal on each voicemail indication arrival. The alert will be
played immediately if no call is connected, otherwise after the end of the call.
F F F F By default the voice mail number is empty and the voice mail alert is set.
7.1.2 VOICE MAIL MENU ACCESS
From the menu, Press
Select
Voice Mail
Main Menu:
Phone Book
Messages
Call & Timers
Select
Exit
Selects Voicemail item
Select
Call
Voice mail menu:
Number
Scroll down using
Alert
Press
Press
Select
Exit
.
CONFIDENTIAL
softkey when on the voice mail item. The voice mail menu is displayed.
or
key, up using
*
softkey to enter the selected item,
Select
softkey to exit to main menu, Long press
Exit
Mitsubishi Electric
key.
#
to go directly to Idle
Exit
Page 99/102
Advertisement
Table of Contents
