Table of Contents
Advertisement
2.
MOBILE SWITCHING ON AND OFF
2.1
MOBILE SWITCH-ON BY THE USER
To switch the phone on, press and hold the
mode is not "Vibrate only", otherwise a short vibrator activation is performed.. Before the mobile becomes ready
for use, the following operations sequence takes place. It is called the "Power On" sequence.
Self check screen:
The whole screen is blacked. The mobile performs various controls on internal components.
"End of tests"
Phone lock entry screen:
Enter phone lock:
A password editor is entered
If the phone lock code is set, it is requested at this stage.
|
The phone lock code is a 4-digit numeric code.
In case of error, you have an infinite number or trials.
Phone lock code entry
"1234"
You can also enter the international emergency number 112 that will be called in this case
During the call, no other phone feature is available. After the end of the call, the phone returns to
the lock code sequence request with an empty entry.
Phone lock entry screen:
Enter phone lock:
Press
Press
****|
entry
Ok
Clear
Phone lock code validation
Ok
PIN entry screen:
Enter PIN:
A password editor is entered.
If the PIN control is active on SIM, it is requested at this stage.
|
The PIN code is a 4-digit to 8-digit number.
The behaviour when entering a PIN is described in Annex B.
PIN entry
"0000"
You can also enter the international emergency number 112 that will be called in this case
During the call, no other phone feature is available. After the end of the call, the phone returns to
the PIN sequence request with an empty entry.
.
CONFIDENTIAL
Power
key. The "
softkey to validate the lock code
Ok.
softkey to erase the last character. Long Press
Clear
Mitsubishi Electric
AUDIO_POWER_ON_TONE
" tone is played if the alert
softkey to erase whole
Clear
Page 18/102
Advertisement
Table of Contents
