SECOLink VIDNET User Manual page 3

Intruder alarm system
3. STORAGE SETUP
Video module can be programmed to send recorded video files to ALARMSERVER.NET, or to save files locally to micro SD card (card content can
be accessed by use the software supporting files of the H.264 format). Storing video files on a server has many advantages. SECOLINK PRO
application installed on smartphones or tablets allows you to easily view files. Additionally, files can be viewed on any device's (smartphone, tablet,
or computer) browser that is connected to the Internet.
A user can participate in our Voucher system which includes storage rental for files and communication between an intruder alarm system, server,
and end user devices (smartphone, tablet, or computer). Contact your system installer to get this code. TRIAL voucher will be activated
automatically when a new system is added to any user's account for the first time (see table below).TRIAL includes features like system control
over TCP/IP, push notifications, video clip storage, and review using an app or web browser's window. TRIAL period is 10 days. When this period
expires, TRIAL will be downgraded to IP VIDNET. IP VIDNET plan is free of charge and valid for unlimited time. An account can be upgraded to IP
VIDNET EXTRA. The subscription period could be one, two, or three years.
System control over IP network,
Voucher name
TRIAL (for 10 days)
IP VIDNET (free of charge)
IP VIDNET EXTRA
Main Menu Settings Video settings Storage setup
Recorded video clips can be sent to ALARMSERVER.NET via 3G modem that is integrated to VIDNET module or
Storage setup
using LAN interface.
Send via LAN Yes
1
Storage setup
2 Send via 3G No
In case of LAN failure the module will use 3G modem and will send videos to ALARMSERVER.NET.
Storage setup
Note: This menu is visible if video sending via 3G is set to No.
3 Backup via 3G Yes
All recorded videos can be saved to micro SD card (tested with micro SD cards up to 32GB in size).
Storage setup
Save to SD Yes
4
4. CREATING A NEW ALARMSERVER.NET ACCOUNT
1. Go to www.alarmserver.net.
2. Click Register at the center of the page (skip steps 2 - 4, if user already have an account).
3. Click on Create account button on End User column.
4. Fill in required fields: name, country, e-mail, password, and system BI. To find system BI, please watch a video posted below these fields. Click
Register to proceed.
5. Login using your e-mail and password. Press Sign in to proceed. To reset the password click Set new link.
6. Enter system name and location. System BI number entered during registration should be visible in the corresponding field. Press Save (on the
right) to proceed.
7. Added system will appear on the list. The TRIAL voucher will be automatically activated when a new system is added to any user's account for
the first time.
5. ASSIGNING USER'S APP TO THE SYSTEM
1. Run application SECOLINK
PRO and tap Let's start.
ALARMSERVER.NET voucher plans
Recorded alarm video preview
push notifications to app
Yes
Yes
Yes
2. Enter your name and your
phone number. Choose Yes in
setting In use and enter details
related to login to server
ALARMSERVER.NET. Press
Done to continue.
in browser or using app
Yes
Yes, recent 1 video clip
Yes, recent 10 video clips
3. Select an alarm system. Tap
and hold for more details. Press
Done to start data downloading
from the ALARMSERVER.NET
Other type video preview in
browser or using app
Yes
Not available
Yes, recent 10 video clips
4. Enter system name and PIN
code. Use Encrypt PIN if SMS will
be used to control the system.
Check the Consists of the system.
Press Done to continue.
VIDNET
User manual
Video recording by
request
Yes
Not available
Yes
Page 3