Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Entre Matic Manuals
  4. Door
  5. Ditec PAM30TEL
  6. Assembly manual

Entre Matic Ditec PAM30TEL Assembly Manual

Assembly manual of telescopic doorset system
Hide thumbs

Advertisement

Quick Links

Download this manual
Ditec PAM30TEL
www.entrematic.com
www.entrematic.com
Assembly manual of telescopic doorset system
(Original instructions)
Manuale di assemblaggio per sistema
serramento telescopico
(Istruzioni originali)
Montageanleitung für Teleskopprofi lsysteme
(Originalsprachlichen Anweisungen)
Manuel d'assemblage pour système
d'huisserie télescopiques
(Instructions originales)
Manual de montaje para sistema de cierre
telescópico
(Instrucciones originales)
Manual de montagem para sistema de
ferragem telescòpico
(Instruções originais)
IP2276 • 2017-04-30

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ditec PAM30TEL and is the answer not in the manual?

Questions and answers

Related Manuals for Entre Matic Ditec PAM30TEL

Summary of Contents for Entre Matic Ditec PAM30TEL

  • Page 1 Montageanleitung für Teleskopprofi lsysteme (Originalsprachlichen Anweisungen) Manuel d’assemblage pour système d’huisserie télescopiques (Instructions originales) Manual de montaje para sistema de cierre telescópico (Instrucciones originales) Manual de montagem para sistema de ferragem telescòpico (Instruções originais) Ditec PAM30TEL IP2276 • 2017-04-30 www.entrematic.com www.entrematic.com...
  • Page 2 Index General safety precautions Avvertenze generali per la sicurezza Allgemeine Sicherheitshinweise Consignes générales de sécurité Advertencias generales de seguridad Advertências gerais para a segurança Operating instruction Indicazioni di utilizzo Hinweise zum Gebrauch Indications d'utilisation Instrucciones de uso Indicações de uso Entrance/Exit door frame Serramento di entrata/uscita Eingangs-/Ausgangsprofil –...
  • Page 3 Vertical and horizontal section of 1+1 Sezione verticale e orizzontale 1+1 anta Vertikal- und Horizontalschnitt für Section verticale et horizontale 1+1 Sección vertical y horizontal de 1+1 Secção vertical e horizontal de 1+1 moving door wings and 1 fixed door mobile e 1 anta fissa con apertura a 1+1 Fahrflügel und 1 Stehflügel mit vantail mobile et 1 vantail fixe avec...
  • Page 4 Vertical and horizontal section of 2+2 Sezione verticale e orizzontale 2+2 Vertikal- und Horizontalschnitt für 2+2 Section verticale et horizontale 2+2 Sección vertical y horizontal de 2+2 Secção vertical e horizontal de 2+2 moving door wings (standard version) ante mobili (versione standard) Fahrflügel (Vollversion) vantaux mobiles (version standard) hojas móviles (versión standard)

  • Page 5: Operating Instructions

    - the PLmax door width is considered to be between the uprights of the fixed doors and/or the frame. The effective passage opening has a tolerance of ±20 mm. - for every type of door, the reference dimension of the automation is indicated (LT). 3. Entrance/exit door frame – Ditec PAM30TEL Series Sliding door made with EN AW 6060 T5 (UNI 9006/1) aluminium alloy extruded profiles...
  • Page 6 - il vano passaggio PLmax viene considerato tra i montanti verticali delle ante fisse e/o della cornice. Il vano passaggio utile ha una tolleranza di ±20 mm. - per ogni tipologia di porta viene indicata la dimensione di riferimento dell’automazione (LT). 3. Serramento di ingresso/uscita – Serie Ditec PAM30TEL Porta scorrevole realizzata con profilati estrusi in lega di alluminio EN AW 6060 (UNI 9006/1) T5...
  • Page 7 - die lichte Öffnung PLmax wird zwischen den Seitenpfosten der Seitenteile und/oder des Rahmens berücksichtigt. Die nutzbare lichte Öffnung hat eine Toleranz von ±20 mm. - für jeden Tortyp wird die Bezugsgröße des Antriebs (LT) angegeben. 3. Eingangs-/Ausgangsprofil – Baureihe Ditec PAM30TEL Schiebetor aus stranggepressten Profilen aus Aluminiumlegierung EN AW 6060 (UNI 9006/1) T5 - Querschnitt 30 mm - geeignet für Antriebsanlagen der Firma DITEC, mit spezifischen Vorkehrungen, um jede Art von Sicherheit und Unfallverhütung zu gewährleisten...
  • Page 8 - la baie de passage PLmax est considérée entre les montants verticaux des vantaux fixes et/ou du cadre. La baie de passage utile a une tolérance de ±20 mm. - la dimension de référence de l'automatisme est indiquée (LT) pour chaque type de porte. 3. Huisserie d'entrée/sortie – Série Ditec PAM30TEL Porte coulissante réalisée avec des profilés extrudés en alliage d'aluminium EN AW 6060 (UNI 9006/1) T5 - section de 30 mm –...
  • Page 9 - el hueco de paso PLmáx se considera entre los montantes verticales de las hojas fijas y/o del marco. El hueco de paso útil tiene una tolerancia de ±20 mm. - para cada tipo de puerta, se indica la dimensión de referencia del automatismo (LT). 3. Cierre de entrada/salida – Serie Ditec PAM30TEL Puerta corredera realizada con perfiles extruidos de aleación de aluminio EN AW 6060 (UNI 9006/1) T5 - sección de 30 mm...
  • Page 10 - para cada tipo de porta é indicada a dimensão de referência do automatismo (LT). 3. Ferragem de entrada/saída – Série Ditec PAM30TEL Porta de correr realizada com perfis extrudados em liga de alumínio EN AW 6060 (UNI 9006/1) T5 - secção de 30 mm...
  • Page 11 4. Legend Moving door wing Anta mobile Fahrflügel Vantail mobile Hoja móvil Portinhola móvel Slow moving door wing Anta mobile lenta Langsam Fahrflügel Vantail mobile lento Hoja móvil lenta Portinhola móvel lenta Fixed door wing Anta fissa Seitenteil Vantail fixe Hoja fija Portinhola fixa Beam...
  • Page 12 5. Profiles shape Scale 1:1 2089 2085 2087 2086 2088 2090 = Visible surface IP2276- 2017-04-30...
  • Page 13 5. Profiles shape Scale 1:1 2226 2091 2092 4073 30.2 2093 2458 4103 = Visible surface IP2276- 2017-04-30...
  • Page 14 5. Profiles shape Scale 1:1 3127 3128 16.5 4480 39.5 3131 3130 = Visible surface IP2276- 2017-04-30...
  • Page 15 5. Profiles shape Scale 1:1 2094 4085 2095 167.5 4063 2096 = Visible surface IP2276- 2017-04-30...
  • Page 16 5. Profiles shape / Gaskets shape Scale 1:1 4671 51.5 113.5 = Visible surface 2098 2139 SP14 2469 2141 2140 IP2276- 2017-04-30...
  • Page 17 6. Accessories KAM30 KAF30 n° 4 Clips n° 8 TPS 4.8 x 32 n° 1 Fixing Bracket n° 2 TC 4.8 x 9.5 n° 1 Floor Guide n° 8 TPS 4.8 x 32 n° 2 Fixing Brackets n° 3 TC 4.8 x 13 KAMT30 n°...
  • Page 18 6. Accessories KT4063 n° 12 TC 3.5 x 9.5 n° 4 TE M6 x 20 n° 2 Nut n° 2 Washer n° 2 TE M8 x 25 n° 2 Beam Older KTT23 n° 4 TC 3.9 x 13 Couple of Beam Endcups IP2276- 2017-04-30...
  • Page 19 6. Accessories K2097L KGIT K2097L 3131 K2097L 3131 3130 3130 ø 15 2097 L - 15 IP2276- 2017-04-30...
  • Page 20 7. Glass thickness Scale 1:1 10-11 22-23 2469 2141 2140 IP2276- 2017-04-30...
  • Page 21 8. Applications Scale 1:2 The PAM30TEL door frames allow frames to be VALOR T motorised with Ditec VALOR T automations. VALOR T automations are not included in the configuration. serramenti PAM30TEL consentono motorizzazione degli infissi con automazioni tipo Ditec VALOR T. Le automazioni VALOR T sono escluse dalla configurazione.
  • Page 22 8. Applications Scale 1:2 VALOR T VALT30 IP2276- 2017-04-30...
  • Page 23 8. Applications Scale 1:2 VALOR T VALT30 IP2276- 2017-04-30...
  • Page 24 9. Vertical and horizontal section of 1+1 moving door wings with right-hand opening L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 25 10. Vertical and horizontal section of 1+1 moving door wings with left-hand opening L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 26 11. Vertical and horizontal section of 1+1 moving door wings with right-hand opening (french version) L (min. 900, max. 2000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 27 12. Vertical and horizontal section of 1+1 moving door wings with right-hand opening installed within doorway (french version) L (min. 900, max. 2000) PL = L - 40 min. 10 LT min. = (3L + 58) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 28 13. Vertical and horizontal section of 1+1 moving door wings with left-hand opening (french version) L (min. 900, max. 2000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 29 14. Vertical and horizontal section of 1+1 moving door wings with left-hand opening installed within doorway (french version) L (min. 900, max. 2000) PL = L - 40 min. 10 LT min. = (3L + 58) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 30 15. Vertical and horizontal section of 1+1 moving door wings with beam with right-hand opening L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 31 16. Vertical and horizontal section of 1+1 moving door wings with beam with left-hand opening L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 32 17. Vertical and horizontal section of 1+1 moving door wings with right-hand opening and overlight L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 33 18. Vertical and horizontal section of 1+1 moving door wings with left-hand opening and overlight L (min. 900, max. 3000) PL = L 50 x 50 x 2 min. 10 LT min. = (3L + 200) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 34 19. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with right-hand opening (french version) L (min. 1400, max. 3500) PL = (L - 54) / 3 x 2 60 x 40 x 2 LT min. = L + 85 22.5 22.5 Horizontal section...
  • Page 35 20. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with right-hand opening installed within doorway (french version) L (min. 1400, max. 3500) PL = (L - 94) / 3 x 2 60 x 40 x 2 LT min.
  • Page 36 21. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with left-hand opening (french version) L (min. 1400, max. 3500) PL = (L - 54) / 3 x 2 60 x 40 x 2 LT min. = L + 85 22.5 22.5 Horizontal section...
  • Page 37 22. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with left-hand opening installed within doorway (french version) L (min. 1400, max. 3500) PL = (L - 94) / 3 x 2 60 x 40 x 2 LT min.
  • Page 38 23. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with beam with right-hand opening L (min. 1400, max. 4000) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min. 30) LTmax = L - 20 22.5 22.5...
  • Page 39 24. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with beam with left-hand opening L (min. 1400, max. 4000) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min. 30) LTmax = L - 20 22.5 22.5...
  • Page 40 25. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with beam with right-hand opening installed within doorway (french version) L (min. 1400, max. 3500) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min.
  • Page 41 26. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with beam with left-hand opening installed within doorway (french version) L (min. 1400, max. 3500) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min.
  • Page 42 27. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with right-hand opening and overlight L (min. 1400, max. 4000) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min. 30) LTmax = L - 20 22.5 22.5...
  • Page 43 28. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with left-hand opening and overlight L (min. 1400, max. 4000) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min. 30) LTmax = L - 20 22.5 22.5...
  • Page 44 29. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with right-hand opening and overlight (french version) L (min. 1400, max. 3500) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min.
  • Page 45 30. Vertical and horizontal section of 1+1 moving door wings and 1 fixed door wing with left-hand opening and overlight (french version) L (min. 1400, max. 3500) PL = (2L - 158 - 2X) / 3 60 x 40 x 2 X (min.
  • Page 46 31. Vertical and horizontal section of 2+2 moving door wings L (min. 1600, max. 4200) PL = L min. 10 min. 10 LT min. = (3L + 208) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 47 32. Vertical and horizontal section of 2+2 moving door wings (french version) L (min. 1600, max. 4000) PL = L min. 10 min. 10 LT min. = (3L + 208) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 48 33. Vertical and horizontal section of 2+2 moving door wings with beam L (min. 1600, max. 4200) PL = L min. 10 min. 10 LT min. = (3L + 208) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 49 34. Vertical and horizontal section of 2+2 moving door wings with overlight L (min. 1600, max. 4200) PL = L min. 10 min. 10 LT min. = (3L + 208) / 2 40.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 50 35. Vertical and horizontal section of 2+2 moving door wings and 2 fixed door wings (french version) L (min. 2800, max. 4200) PL = (L - 114) / 3 x 2 LTmax = L + 70 22.5 22.5 Horizontal section Vertical section IP2276- 2017-04-30...
  • Page 51 36. Vertical and horizontal section of 2+2 moving door wings and 2 fixed door wings with beam L (min. 2800, max. 6500) PL = (2L - 168 - 4X) / 3 X (min. 30) X (min. 30) LTmax = L - 20 22.5 22.5 Horizontal section...
  • Page 52 37. Vertical and horizontal section of 2+2 moving door wings and 2 fixed door wings with beam (french version) L (min. 2800, max. 4200) PL = (2L - 168 - 4X) / 3 X (min. 30) X (min. 30) LTmax = L - 20 22.5 22.5 Horizontal section...
  • Page 53 38. Vertical and horizontal section of 2+2 moving door wings and 2 fixed door wings with overlight L (min. 2800, max. 6500) PL = (2L - 168 - 4X) / 3 X (min. 30) X (min. 30) LTmax = L - 20 22.5 22.5 Horizontal section...
  • Page 54 39. Vertical and horizontal section of 2+2 moving door wings and 2 fixed door wings with overlight (french version) L (min. 2800, max. 4200) PL = (2L - 168 - 4X) / 3 X (min. 30) X (min. 30) LTmax = L - 20 22.5 22.5 Horizontal section...
  • Page 55 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 56 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 57 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 58 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 59 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 60 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 61 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 62 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 63 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 64 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 65 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 66 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 67 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 68 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 69 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 70 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 71 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 72 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 73 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 74 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 75 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 76 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 77 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 78 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 79 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 80 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 81 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 82 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 83 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 84 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 85 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 86 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 87 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 88 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 89 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 90 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 91 40. Technical sections Scale 1:1 IP2276- 2017-04-30...
  • Page 92 40. Technical sections Scale 1:1 40,5 22,5 IP2276- 2017-04-30...
  • Page 93 40. Technical sections Out of scale 40.5 22.5 28.5 IP2276- 2017-04-30...
  • Page 94 40. Technical sections Scale 1:1 40,5 22,5 IP2276- 2017-04-30...
  • Page 95 40. Technical sections Scale 1:1 40,5 22,5 IP2276- 2017-04-30...
  • Page 96 40. Technical sections Out of scale 40.5 22.5 28.5 IP2276- 2017-04-30...
  • Page 97 40. Technical sections Scale 1:1 40,5 22,5 IP2276- 2017-04-30...
  • Page 98 40. Technical sections Scale 1:2 40.5 22.5 IP2276- 2017-04-30...
  • Page 99 40. Technical sections Scale 1:2 40.5 22.5 IP2276- 2017-04-30...
  • Page 100 40. Technical sections Scale 1:1 22,5 22,5 IP2276- 2017-04-30...
  • Page 101 40. Technical sections Out of scale 22.5 22.5 IP2276- 2017-04-30...
  • Page 102 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 103 40. Technical sections Scale 1:1 22,5 22,5 IP2276- 2017-04-30...
  • Page 104 40. Technical sections Out of scale 22.5 22.5 IP2276- 2017-04-30...
  • Page 105 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 106 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 107 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 108 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 109 40. Technical sections Scale 1:1 40,5 22,5 IP2276- 2017-04-30...
  • Page 110 40. Technical sections Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 111 40. Technical sections T100 Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 112 40. Technical sections T101 Scale 1:2 22.5 22.5 IP2276- 2017-04-30...
  • Page 113 Moving door wing 41. Processes T102 Anta mobile Fahrflügel Vantail mobile Hoja móvil Portinhola móvel 2089 2091 IP2276 - 2017-04-30...
  • Page 114 Moving door wing 41. Processes T103 Anta mobile Fahrflügel Vantail mobile Hoja móvil Portinhola móvel 2090 2091 IP2276 - 2017-04-30...
  • Page 115 Fixed door wing 41. Processes T104 Anta fissa Seitenteil Vantail fixe Hoja fija Portinhola fixa IP2276 - 2017-04-30...
  • Page 116 42. Details of additional dimensions T105 VALOR T LVM1 LVM1 IP2276- 2017-04-30...
  • Page 117 43. Instructions for door assembling and installing (list of types) T106 C1 (left) C1 (right) C2 (left) C2 (right) C3 (left) C3 (right) IP2276- 2017-04-30...
  • Page 118 43. Instructions for assembling and installing T107 Mobile fast wing Mobile slow wing V2091 V2086 V2095 V2095 KAM30 V2086 KAM30 V2091 RGR2469 RGR2140 RGR2141 RGR2469 RGR2140 RGR2141 V2090 V2089 V2087 VSP14 V2096 V2087 VSP14 VGR2098 IP2276- 2017-04-30...
  • Page 119 43. Instructions for assembling and installing T108 Fix wing V2089 V2094 V2085 V2090 KAF30 V2094 RGR2469 RGR2140 V2087 RGR2141 IP2276- 2017-04-30...
  • Page 120 43. Instructions for assembling and installing (doors type C1/D1) T109 Frame post fixing Floor guide fixing Wing positioning Post closing fixing Simplified beam fixing Automation climbing Operator fixing IP2276- 2017-04-30...
  • Page 121 43. Instructions for assembling and installing (doors type C2/D2) T110 Fixing frame installation Post closing fixing Section Fix wing positioning Support beam fixing End cap Automation climbing IP2276- 2017-04-30...
  • Page 122 43. Instructions for assembling and installing (doors type C3/D3) T111 Fixing frame installation Post closing fixing Section Fix wing positioning Floor guide fixing Beam holder positioning Wing lateral side fixing IP2276- 2017-04-30...
  • Page 123 43. Instructions for assembling and installing (doors type A3/B3) T112 Automation climbing Operator fixing Beam cover Beam cover fixing IP2276- 2017-04-30...
  • Page 124 43. Instructions for assembling and installing T113 Mobile wing bracket fixing Carrier adjustment Belt adjustment Electrolock adjustment IP2276- 2017-04-30...
  • Page 125 All the rights concerning this material are the exclusive property of Entrematic Group AB. Although the contents of this publication have been drawn up with the greatest care, Entrematic Group AB cannot be held responsible in any way for any damage caused by mistakes or omissions in this publication. We reserve the right to make changes without prior notice.
  • Page 126 Entrematic Group AB Lodjursgatan 10 SE-261 44, Landskrona Sweden www.entrematic.com...