Section I: Installation; Standard Installation Parts - Toyotomi FF-95 Operating Manual

SECTION I:
INSTALLATION
GENERAL DESCRIPTION: The FF-95 is designed to be installed in an outside wall so the full advantage of
installation simplicity can be made with the "Flue Pipe", which eliminates the need for tall chimney type flues. No
hearth or fire surround is required.
The following standard installation parts are enclosed with heater. For alternate installation methods, you may
need to purchase additional accessories which are available from your TOYOTOMI dealer. See "Accessory Parts".
Drip Tray (1) (PART #17185415)
Pipe Holder (1) (PART #17212685)
(3)
Flue Pipe (1) (PART #17224296)
Wood Screw (3) Exhaust Air Cap (1) (PART #17212661)
(PART #17206066) Intake Air Cap (1) (PART #17212656)
L-shaped Hose (2) (PART #17212692)
Hose Band (2) (PART #17212677) (Hose Clamp)

STANDARD INSTALLATION PARTS

Wall Bracket (2 sets) (PART #17212589)
Bind Tapping Screw (1) (PART #17187555)
Wood Screw (1) (PART #17206066)
Pipe Stopper (1) (PART #17212778)
Bent Joint (L) (1)
(PART #17214698)
Inlet Hose (1) (PART #17206091)
Oil Catch (1) (PART #17185025)
ENGLISH
Insulating Cover
(PART #17206025)
GB
14