How To Store Accessories; Electric Pressure Washer Rinsing - Briggs & Stratton 020681 Operator's Manual

Electric Pressure Washer Rinsing

1. Select desired high pressure spray tip following
instructions How to Use Spray Tips.
2. Keep spray gun a safe distance from area you plan to
spray.
WARNING Risk of kickback. Spray gun could
kickback causing you to fall resulting in death or
serious injury.
• Operate the electric pressure washer from a
stable surface.
• Be extremely careful if you must use the electric
pressure washer from a ladder, scaffolding, or any
other similar location.
• Firmly grasp spray gun with both hands when using
power spray modes to avoid injury when spray gun
kicks back.
3. Apply a high pressure spray to a small area and then
check surface for damage. If no damage is found, you
can assume it is okay to continue rinsing.
4. Start at top of area to be rinsed, working down with
same overlapping strokes as you used for cleaning.
Other Cleaning Tips
• NEVER leave the electric pressure washer unattended
while it is plugged into an electrical outlet and while
water is supplied to the equipment.
• If you have the spray tip too far away from the surface
being washed, the cleaning may not be as effective.

How to Store Accessories

The unit is equipped with areas to store your high pressure
hose, spray gun, spray wand, and power cord. Coil power
cord and high pressure hose around hook. Store spray gun
in the spray gun holder. Store the spray wand in the spray
wand holder. Store spray tips in holder provided on the
spray wand. Identify all accessories with the illustrations in
Features and Controls.
11