Subscribe to Our Youtube Channel
Related Manuals for Briggs & Stratton 020545-01
Summary of Contents for Briggs & Stratton 020545-01
- Page 2 Thank you for purchasing this quality-built Briggs & Stratton® pressure washer. We are pleased that you’ve placed your confidence in the Briggs & Stratton brand. When operated and maintained according to the instructions in this manual, your Briggs & Stratton pressure washer will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with pressure washers and how to avoid them.
-
Page 21: Troubleshooting
Troubleshooting Problem Cause Correction 1. Low pressure spray tip installed. 1. Replace with high pressure spray tip. 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. 4. Inlet hose is kinked or leaking. 4. - Page 22 BRIGGS & STRATTON PRODUCTS WARRANTY POLICY January 2014 LIMITED WARRANTY Briggs & Stratton warrants that, during the warranty period specified below, it will repair or replace, free of charge, any part that is defective in material or workmanship or both. Transportation charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is effective for and is subject to the time periods and conditions stated below.
Need help?
Do you have a question about the 020545-01 and is the answer not in the manual?
Questions and answers