Kambrook KBL620 Series Instruction Booklet page 16

Using Your Kambrook Soup Maker
NOTE: Use caution when
removing the lid and pouring
hot soup from the soup maker
as hot soup and steam will scald.
Do not pour soup too quickly.
11. Clean the soup maker following
the 'Care, Cleaning and Storage'
instructions on page 20.
Using the Blend Pre-Set
Function
1. Place the soup maker base on a
dry, flat surface such as a bench
top. Ensure that the speed control
dial is in the off position, soup
maker is switched off at the power
outlet and the plug is not plugged
into the power outlet.
2. Add all ingredients into the stainless
steel jug. Ensure that the food
contents and liquids are between
the indicated MIN and MAX
markings.
3. Place the assembled lid onto the
jug and lock into place.
4. Place the stainless steel jug onto
the motor base ensuring that it is
correctly and securely position.
5. Plug the power cord into a 230V or
240V power outlet and switch on.
16
KBL620_IB_D17.indd 16
6. Press the ON/OFF button followed
by the BLEND button.
7. During the BLEND cycle, the soup
maker will blend on and off for
30 seconds. When the cycle
is complete, it will beep three
times and the control panel will
illuminate. Switch the unit off at the
power outlet and remove the plug.
8. Remove the jug from the motor
Fig. 5
base and place on a flat surface.
Unlock and remove the lid
assembly from the jug.
9. Clean the soup maker following
the 'Care, Cleaning and Storage'
instructions on page 20.
NOTE: The pre-set functions
can be stopped at any time by
pressing the ON/OFF button. This
may be useful with ingredients
that only require a short cooking
time.
NOTE: The cooking cycle times
for the SMOOTH and CHUNKY
pre-set functions will vary
depending on the quantity,
size and temperature of the
ingredients used.
Using the Manual Speed
Control Dial
1. Place the soup maker motor base
on a dry, flat surface such as a
bench top. Ensure that the speed
control dial is in the OFF position,
the soup maker is switched off at
the power outlet and the plug is
removed from the power outlet.
continued
27/01/2017 10:52 am