Depth Gauge - Makita DHR400 Instruction Manual

Depth gauge

The depth gauge is convenient for drilling holes of
uniform depth.
Press and hold the lock button, and then insert the
depth gauge into the hex hole.
1
► 1 . Depth gauge 2. Lock button
Make sure that the toothed side of the depth gauge
faces the marking.
1 2
► 1 . Marking 2. Toothed side
Adjust the depth gauge by moving it back and forth
while pressing the lock button. After the adjustment,
release the lock button to lock the depth gauge.
NOTE: Make sure that the depth gauge does not
touch the main body of the tool when attaching it.
2
Dust extractor attachment
Optional accessory
Installing the dust extractor
attachment
1. Loosen the side grip on the tool.
2. Install the dust cover so that the claws of the dust
cover fit in the grooves between the tool and the side
grip.
1
► 1 . Dust cover 2. Claw 3. Groove
Tighten the side grip securely.
3.
Set the suitable bellows or dust cover extension
4.
for your work. When you use bellows, attach the joint to
its top. When you stack two bellows, connect them with
the joint.
2
► 1 . Dust cover extension 2. Dust cover 3. Joint
4. Bellows
11 ENGLISH
2
3
1
3 4