Table of Contents
Advertisement
Ram Ball Mounting Assembly
Attaching the Ram Ball to the Vehicle Dock
Figure 8. Installing the Ram Ball on the Vehicle Dock
Secure the Ram Ball to the mounting area using the four supplied 10-24 x
5/8" Phillips head screws and four supplied 10-24 hex nuts.
Final Assembly
Installation Guide
1. Align the second Ram Ball with the four screw holes on the rear of the
Vehicle Dock as shown in Figure 8.
1. Insert the Ram Ball, mounted to the rear of the Vehicle Dock assembly,
into the Ram Ball assembly you earlier affixed to the mounting surface
(see Figure 9). Tighten the adjustment knob to secure the Ram Ball in
place.
13
Advertisement
Table of Contents
