Table of Contents
Advertisement
Mounting Options
Components, Materials and Tools
Ram Ball Assembly (sold separately)
Figure 7. Ram Ball Assembly
12
•
Ram Ball Assembly (sold separately)
•
8 screws and nuts for mounting Ram Ball (supplied)
•
Phillips head screwdriver
1. Loosen the large adjustment knob handle on the Ram Ball assembly.
2. Remove both Ram Balls from the mount as demonstrated in Figure 7.
Ram Balls
3. Use four screws (customer supplied) to secure one of the Ram balls to
the desired mounting surface. Set the other Ram ball aside to use later in
the assembly process.
4. Re-attach the Ram Ball Assembly to the Ram Ball you just affixed to the
mounting surface.
Screws
®
Falcon
4400 Series Powered Vehicle Dock
Adjustment
Knob
Advertisement
Table of Contents
