Table of Contents
Advertisement
Electrical Accessories
Electrical Accessories
Installation of the PVD may require accessory electronic equipment for proper
and safe operation. Some of this equipment may not be available through
PSC, but could be available through your dealer, forklift parts provider, or
other suppliers. See Appendix A, "Accessories and Peripherals" on page 25.
DC/DC Converter.
from +24, +36 and +48 volt battery systems.
DC Conditioner/UPS.
interruptions in battery voltage due to peak loads or disconnect.
Delay Timer.
equipment, to reduce battery drain.
Noise Spike/RF Filter.
spikes on the power system.
Electrical Accessory Matrix
Table 1 summarizes the accessory recommendations and options available
depending on the forklift voltage application. This matrix should be used only
as a reference and may not include accessories for all applications.
Table 1. Electrical Accessories
Accessory
DC/DC Converter
DC Conditioner/UPS
Delay Timer
Noise Spike/RF Filter
5-Amp Dock In-Line Fuse
*Ensure that the device being installed is properly rated for use on your vehicle.
Installation Guide
Voltage step down device used to power the terminal
Used to provide backup DC power during sags or
Provides automatic shut-off of power to a terminal or other
Used to suppress high voltage and RF voltage
Forklift System Voltage
12 volt
24 volt
Not Required
Required
Optional*
Not Required
Optional*
Optional*
Recommended
Recommended
Required
Required
36 volt
48 volt
Required
Required
Not Required
Not Required
N/A
N/A
Recommended
Recommended
Required
Required
7
Advertisement
Table of Contents
