Xinje TH465-M User Manual page 51

Step 3:
Please see the detailed motion:
Calibrate the touch panel
Repeat as the target moves around the screen
1. Click the centre of the cross
Calibrate the touch panel
Repeat as the target moves around the screen
4. Click the centre of the cross on
the right bottom
Calibrate the touch panel
Repeat as the target moves around the screen
Step 4:
When finished the adjustment, the result is as the following;
Calibrate the touch panel
Repeat as the target moves around the screen
Adjustment process is end.
Note:
If the adjustment process is end, please turn off the power of TH, then turn off the DIP switch 3, then
turn on the power again. Now you can use TH normally.
TH series Touchscreen User Manual
Repeat as the target moves around the screen
2. Click the centre of the cross on
the top left
Repeat as the target moves around the screen
3. Click the centre of the cross on
the left bottom
5. Click the centre of the cross on
the top right to finish the adjust
process.
Repeat as the target moves around the screen
Adjustment process is failed. Please do
again.
Page 51 of 81
Calibrate the touch panel
Calibrate the touch panel
Calibrate the touch panel
MANUL018R2V1