Simulate Online - Xinje TH465-M User Manual

6-4 Simulate online

By connecting the PLC and PC, it can read the data from PLC, simulate the operate of TH in
Touchwin software. Do not have to download the project into TH, you can control the PLC in your PC.
Make sure the connection is correct between PLC and PC, the com port setting is right.
Note:
Only Xinje PLC support the simulate online function with TH.
1. Connect Xinje PLC with the PC via serial port.
2. Click the to enter simulate online. It will show below message:
This means that the simulate online is not registered, you can only use it for 2 hours. If you want to
use it for longer, please contact Xinje company to get register number.
3. Click ok to enter simulate online screen. Right click the screen to show below menu:

Log: log on time and history record

About: the version information of autowin

Com port: the serial port number of your PC which is connected with PLC.

Register: register to get user right.

Exit: exit the autowin.
If showing the following message, it means the connection between PLC and PC is not good, or the
serial port number is wrong.
TH series Touchscreen User Manual Page 47 of 81 MANUL018R2V1