7-1 Adjust the touch screen
The touch area adjustment function can make the component touch more precise.
The adjustment steps:
Step 1:
Turn on the DIP switch 3, then power on the TH again, it will show the following screen:
Turn on switch 3
1
2
3 4
Step2:
After clicking the cross centre, the adjust cross will jump to the second position. Keep on click the
cross until the cross jump to the last position 5.
Calibrate the touch panel
Repeat as the target moves around the screen
1
2
TH series Touchscreen User Manual
Click the centre of the adjust cross
ON
OFF
5
3
Page 50 of 81
Calibrate the touch panel
Repeat as the target moves around the screen
4
Adjust cross
MANUL018R2V1