Table of Contents
Advertisement
Manual Rebuild
After you replace a failed disk drive, the replacement drive must be rebuilt in
order to restore the Array.
To initiate an array Rebuild manually:
1.
In Tree View, select the Array
Figure 76. Start Rebuild Wizard.
2.
In Information View, click on the Start button inside the Rebuild Wizard box.
Figure 77. Rebuild Wizard disk drive selection window.
3.
In the Rebuild Wizard, select the drive to be rebuilt (the replacement drive)
and click Next.
Chapter 5: RAID Monitoring and Maintenance
icon of the array you want to rebuild.
77
Advertisement
Table of Contents
