Arrays
Create an Array
1.
In Tree View, click the + to the left of the Controller
Channels. Click the + to the left of each Channel
unassigned disk drives. Unassigned drives have this
The available RAID selection depends on the number of disk drives
available. The table below lists the Levels and drives required.
See the Appendix A for a more detailed description.
RAID Level
0
1
0+1
5
JBOD
Table 3. RAID Levels available with FastTrak SX4000 series and S150 SX4.
2.
Right-click on the Controller
select New Array from the popup menu
(right). A Create Array icon appears.
Chapter 5: RAID Monitoring and Maintenance
Name
Striping
Mirroring
Striping + Mirroring
Distributed Parity
Single Drive
icon and
61
icon to see the
icon to see the
icon.
Minimum
Maximum
drives
drives
2
2
4
3
1
4
2
4
4
4