Chapter 5: RAID Monitoring and
Maintenance with PAM
This chapter describes using PAM to monitor and manage your RAID system.
The chapter is divided into sections for major PAM functions:
•
Local PAM
•
Remote PAM
•
Manage Users
Launch PAM
Figure 37. Desktop icons (left) and Start Menu entries (right).
To Start PAM, click on a Desktop icon or go to Start > Programs > Promise
Array Management and select:
Local PAM – Use to monitor and manage the FastTrak Controller in your PC.
See log-in instructions on the next page.
Remote PAM – Use to monitor FastTrak Controllers over your network. See log-
in instructions on page 45.
•
Alert Notification
•
Controller
•
Arrays
43