Cal Spas Patio Owner's Manual page 44

42
Listening to Devices
There are three ways to connect your device to the media
locker: With the USB connection, Bluetooth connection,
and the auxiliary input.
1. Connecting via USB
The Aquatic AV digital media locker comes with one USB
connector for Apple devices. If you have another kind of
device, you will need to supply your own USB connector,
such as the type shown below.
1. Attach your device to the USB cable inside the digital
media locker using the appropriate USB connector.
Apple USB connector
2. Secure the device with the anchor straps.
3. Close and lock the media locker's protective door.
Press POWER on the remote control or Power button
4.
on the locker to turn it ON.
5. Press MODE on the remote control to select USB
mode. Use the buttons as shown in the remote
function chart.
Note: When USB devices are connected to the USB
input, the device's battery will charge.
Search for Songs and Playlists
Apple devices
Press SEARCH to enter iPod searching mode.
1.
2. Once in searching mode, the remote will display
'Playlist'. Continue to press SEARCH to scroll through
the search modes below:
1) Playlist 2) Artist 3) Album 4) Song 5) Genre 6)
Composer 7) Audio Book
3. Press PLAY/PAUSE To select the desired search
mode.
4. Press Volume UP/DOWN to scroll through your
media in the selected search mode.
Once you find the desired media, press PLAY/
5.
PAUSE to make your selection. If your selection is
a song, it will begin to play. If you select a playlist,
artist, album, genre, composer or audio book, the
songs in the selected folder will be visible. Press
PLAY/PAUSE to play the desired song within the
folder.
www.calspas.com
USB micro B connector
Other USB Devices
1. Press SEARCH to enter the USB searching mode.
2. Press Volume UP/DOWN to scroll through the
folders on your USB device. To select a folder, press
the PLAY/PAUSE button.
Press Volume UP/DOWN to scroll through the
3.
songs in the folder and press PLAY/PAUSE to play
the desired song.
2. Connecting via Bluetooth
1. Switch on your Bluetooth device.
2. Select 'AQUATIC AV' from the list of available devices
to pair (no password is needed).
Only one Bluetooth device can be paired with the Digital
Media Locker at any time.
Bluetooth mode will be activated once a Bluetooth device
is linked. Play the song from device and the sound will
play through the Digital Media Locker.
• Press PLAY/PAUSE to play or pause the song.
Press FAST REWIND or FORWARD buttons to
•
play previous/next song file.
Track and volume can be controlled directly from your
Bluetooth device, remote control or door controls.
3. Connecting via Auxiliary Input
When you connect your device via the auxiliary input, you
play media directly to the audio input of the media locker.
The remote control can not control your device when it is
connected through the auxiliary input. You will need a 3.5
mm audio connector as shown below.
1. Connect your MP3 device to the 3.5 mm jack input.
2. Secure the device with the anchor straps.
3. Close and lock the media locker's protective door.
Press POWER on the remote control or the POWER
4.
button on the locker to turn it ON.
5. Press MODE on the remote control to select 'AUX
IN' mode.
Only one auxiliary input (3.5 mm jack) can be used at any
one time.
3.5 mm audio cable
2017 Portable Spa
LTR20171000, Rev. C