Product Details - Bosch Therm 4000 S Installation And Operating Instructions Manual

ventilation openings in doors,
windows and walls.
▶ Consult an approved contractor in the
following cases to ensure that the
ventilation requirements are met:
– If structural modifications are
made (e.g. replacing windows and
doors)
– If devices with an air discharge
outside are subsequently installed
(e.g. extractor or circulation fans,
kitchen fans or air conditioning
units).
Combustion air/ambient air
The air in the installation location must
be free of flammable or chemically
aggressive substances.
▶ Do not store or use any highly
flammable or explosive materials
(paper, petrol, thinners, paints etc.)
within the vicinity of the heat source.
▶ Do not store or use any corrosive
substances (solvents, adhesives,
chlorinated cleaning agents, etc.)
within the vicinity of the heat source.
Handover to the user
Instruct the user in the operation and
operating conditions of the product.
▶ Explain the operation - with particular
emphasis on all safety-related
actions.
2

Product details

GWH devices are for DHW heating. They can be started up by
Therm 4000 S – 6 720 815 298 (2017/05)
▶ Explain that conversions or repairs
must only be carried out by an
approved contractor.
▶ Point out the need for regular
inspections and maintenance for safe
and environmentally compatible
operation.
▶ The installation and operating
instructions must be given to the user
for keeping.
Safety of electrical devices for
domestic use and similar purposes
The following requirements apply in
accordance with EN 60335-1 in order to
prevent hazards when using electrical
devices:
"This device may be operated by
children aged 8 or over, by people with
physical, sensory and mental
disabilities, and by people who have no
experience with this type of device,
provided they are supervised or
instructed on how to use the device
safely and on the associated risks.
Children must not play with the device.
Children must not clean or service the
device without supervision."
"In order to prevent hazards, damaged
power cables must be replaced by the
manufacturer, the service department
or an approved contractor, who has
been authorised by the manufacturer."
simply pressing a key.
Product details
5