Removing The (U)Sim Card; Microsd Card; Inserting The Microsd Card - Zte F100 User Manual

ZTE F100 User Manual
• A (U)SIM card can be easily damaged if its metal contacts become scratched. Therefore, take special
care when holding or inserting it.
The charger and other accessories should be disconnected from your phone before you insert or remove
•
the (U)SIM card.
When inserting the (U)SIM card, make sure that the metal contacts face downward and the cut corner is
•
in the right direction, as shown on your phone.

Removing the (U)SIM card

1. Press and hold End Key to power off your phone.
2. Remove the back cover and battery. See Setting Up Your Phone-Battery- Removing the battery.
3. Slide the (U)SIM card out of the card holder, as shown in the following picture.

microSD Card

The microSD card gives your handset a very large memory capacity. This allows you to save multimedia
data, including images, photos, videos, MP3 audio files, and ring tones. You can also use this memory
card to store any other files.
Notes:
Your phone can support a microSD card with capacity up to 4GB.
microSD Logo is a trademark.

Inserting the microSD card

1. Pull the microSD cover out of the card slot and rotate it 90 degrees.
2. Handle the card by the edges and carefully insert it with the cut edge oriented as shown in the picture.
3. Push the card until it clicks into position.
Confidential and Proprietary Information of ZTE CORPORATION 19