Dometic SC 26 Operating Manual page 11

CoolFun SC26, SCT26, SC30, SC38
5.1 Control elements
No. in
fig. 2, page 3
1
2
3
4
5
6
7
Only SC30, SC38:
The desired mode is selected with the cold/hot switch (fig. 2 5, page 3).
When the cooler is connected to an AC mains supply, it can be used in two different
operating modes:
• ECO mode: the cooler consumes less energy
• MAX mode: the cooler reaches maximum cooling capacity
The desired cooling capacity is selected with the cooling capacity control (fig. 2 6,
page 3):
➤ To increase the cooling capacity, turn the cooling capacity control clockwise.
For the maximum cooling capacity turn the cooling capacity control clockwise
all the way to the stop (MAX position).
➤ To decrease the cooling capacity, turn the cooling capacity control counter-
clockwise.
To turn off the cooler, turn the cooling capacity control counterclockwise all the way
to the stop (OFF position).
When the cooler is connected to the DC socket, the cooling capacity cannot be
adjusted.
EN
Description
USB port for power supply
Connection cable for DC connection
Connection cable for AC connection
Ventilation slots
Cold/hot switch
Cooling capacity control
Handle
Technical description
11