Table of Contents
Advertisement
ProfiShark 1G Manager
Installation
To install the ProfiShark 1G Manager on Windows, execute the
setup utility located in the "Windows" folder of the USB flash
drive. Please make sure any previous version of the ProfiShark
1G Manager has been uninstalled before starting the setup
utility. The setup utility will create a launch icon in your start
menu.
To install the ProfiShark 1G Manager on Linux, follow the
instructions in the Installation.txt file located on the USB flash
drive.
The latest software releases can be found in the Resource
Center at www.profitap.com.
Description
ProfiShark 1G Manager is a standalone application designed
by Profitap. It provides means for statistical analysis of a
network prior to a deeper investigation using an analyzer.
It also provides options for port diagnostic, port control,
timestamping, and traffic capture. It also includes a
firmware flashing utility. ProfiShark 1G Manager can be used
simultaneously with a software network analyzer, without the
need to interrupt data capture.
Statistics
ProfiShark 1G Manager provides several different visual
representations for network statistics.
Counters
The Counters tab lists every counter embedded in the
ProfiShark 1G for both network ports. The counters are 64-bit
hardware counters. They are cleared at hardware startup and
at link reconnection.
Statistics can be reset individually for each port or for the two
ports at the same time using the buttons on the left.
Clearing the counters using the buttons does not clear the
hardware counters, but stores all counters in reference
counter. The displayed counters are the result of the formula
(hardware counter - reference counter).
9
Hide quick links:
Advertisement
Table of Contents
