Table of Contents
Advertisement
Log
The Log tab offers to set thresholds for bandwidth usage and
CRC error rate. Every time the threshold is exceeded, a log
entry is added, allowing to easily identify the type, date, and
port of the event.
This can be used for long term analysis, where events happen
randomly over a long period of time.
Network Ports Diagnostic
Ports Control
Customizable port settings are located on the right side of this
tab:
The ProfiShark 1G is set to in-line mode by default. Span mode
can be enabled or disabled in this section.
In in-line mode, both ports are controlled at the same time. In
Span mode, both ports can be configured separately (speed,
Full-Duplex/Half-Duplex, enable/disable autonegotiation).
12
Hide quick links:
Advertisement
Table of Contents
