Profishark 1G+ Visual Description - ProfiTap PROFISHARK 1G User Manual

ProfiShark 1G+ Visual Description

9 10
1
1 - Port A (RJ45) connected to the network
2 - Port B (RJ45) connected to the network
3 - PPS input (SMA Female)
4 - GNSS (GPS/GLONASS) antenna input (SMA Female)
5 - Sync LED
6 - Power indicator LED
7 - Optional DC input (5V/1A)
8 - USB 3.0 connector linked to your monitoring device
(i.e. a laptop computer)
9 - 10 - 11 - 12
LEDs. LEDs functions are named on top of the ProfiShark.
TAP functions:
Steady LED 10 (10): TAP is operating at 10 Mbit/s
Steady LED 100 (11): TAP is operating at 100 Mbit/s
Steady LED 10
Steady Link/Activity (9)(12): the port is linked up
Blinking Link/Activity (9)(12): the port is linked up and has RX/TX
activity
Blinking LED 10
to connect
Alternating LED 10
common speed between network A and network B
Steady Sync LED (5): the internal timestamping is synchronized
with the UTC time with a ± 16ns precision
General functions:
Blinking LED 10 (10): The ProfiShark is initializing
Blinking LED 100 (11): The ProfiShark HW firmware is corrupted
11 12
2
3
4
5
- The ProfiShark's state is displayed on the front
(10) + LED 100 (11): TAP is operating at 1000 Mbit/s
(10) + LED 100 (11): TAP not connected or trying
(10) + LED 100 (11): TAP cannot find a
8
7
6
7