Profishark 1G Visual Description - ProfiTap PROFISHARK 1G User Manual

ProfiShark 1G Visual Description

6 7
1
1 - Port A (RJ45) connected to the network
2 - Port B (RJ45) connected to the network
3 - Power indicator LED
4 - USB 3.0 connector linked to your monitoring device
(i.e. a laptop computer)
5 - Optional DC input (5V/1A)
6 - 7 - 8 -
LEDs. LEDs functions are named on top of the ProfiShark.
TAP functions:
Steady LED 10 (7): TAP is operating at 10 Mbit/s
Steady LED 100 (8): TAP is operating at 100 Mbit/s
Steady LED 10
Steady Link/Activity (6)(9): the port is linked up
Blinking Link/Activity (6)(9): the port is linked up and has RX/TX
activity
Blinking LED 10
to connect
Alternating LED 10
speed between network A and network B
General functions:
Blinking LED 10 (7): The ProfiShark is initializing
Blinking LED 100 (8): The ProfiShark HW firmware is corrupted
6
8 9
2
9 - The ProfiShark's state is displayed on the front
(7) + LED 100 (8): TAP is operating at 1000 Mbit/s
(7) + LED 100 (8): TAP not connected or trying
(7) + LED 100 (8): TAP cannot find a common
5
4
3