Charging With Dcs - NEC S1596-01 User Manual

3.3

Charging with DCS

Before starting recharge, confirm
that the DCS power lamp is ON.
If not, turn on the power switch.
With DCS, you may put the MT itself
or the
Main Battery (S1596-05) for
recharge.
1. Recharging the MT
Plug the MT charging terminal into
the DCS charging terminal.
Confirm that the MT charging lamp turns
on (becomes orange).
When charging is complete, the
charging lamp changes to green.
* If the charging lamp does not turn on:
Check that the MT charging terminal is
correctly plugged into the DCS
charging terminal.
Make sure to use the special
rechargeable Terminal(S1586-01) for
this product.
Using other Terminal may result in
damage or failure.
2. Charging the Main Battery
Insert the
charging terminal.
Confirm that the DCS charging lamp
turns on (becomes orange).
When charging is complete, the
charging lamp changes to green.
* If the charging lamp does not turn on:
Check that the Main Battery charging
terminal is correctly plugged into the
DCS charging terminal.
Make sure to use the special Main
Battery
product.
Using other rechargeable battery pack
may result in damage or failure.
- 21 -
Main Battery
(S1586-05) for this
into the DCS