Maintenance - GoPro Fusion User Manual

MAINTENANCE

Follow these guidelines to get the best performance from your camera:
• Always store the camera in the Fusion Case when not in use. The
lenses are exposed to capture spherical content and are unprotected.
Scratches to the lenses are not covered under the warranty.
• To protect the lenses from damage, do not rest Fusion on its front or
back side. Be sure the lenses are not resting against any surface.
• To clean the lenses, wipe them with a soft, lint-free cloth. If debris
becomes lodged between the lens and the trim ring, flush it out with
water or air. Do not insert foreign objects around the lens.
• When Fusion is not in use, be sure to store it in the Fusion Case to
protect the lenses from damage.
• The camera is waterproof to 16ft (5m)—no housing needed. Ensure
that the doors are closed before using the camera in or around water,
dirt, or sand.
• Before closing the doors, be sure the seals are free of debris. If
needed, clean with a cloth.
• Before opening the doors, be sure the camera is free of water or
debris. If needed, rinse the camera with fresh water and dry it with
a cloth.
66
MAINTENANCE
• If sand or debris hardens around the doors, soak the camera in warm
tap water for 15 minutes and then rinse thoroughly to remove the
debris before opening the doors.
• For best audio performance, shake the camera or blow on the
mics to remove water and debris from the microphone holes. To
prevent damage to the internal waterproof membranes, do not use
compressed air to blow into the mic holes.
• After every use in salt water, rinse the camera with fresh water, and
dry with a soft cloth.
67