GoPro Fusion User Manual page 8

GETTING STARTED
LOCATING YOUR CAMERA'S USERNAME AND PASSWORD
Your camera's username and password are needed when you connect your
camera to other devices. To display this information at any time, complete
the steps below.
1. Press the Mode button [
[ ], then press the Shutter button [
2. Press the Shutter button [
Connections [ ].
3. Press the Mode button [
Shutter button [ ] to display the username and password.
4. Press the Mode button [
press the Shutter button [
14
] repeatedly until you get to Settings
] to select it.
] repeatedly until you get to
] to highlight Cam Info, then press the
] repeatedly until you get to Done, then
] to select it.
GETTING STARTED
2 sec
POWERING ON + OFF
To Power On:
Press the Mode button [ ]. The camera beeps several times while
the camera status lights flash. When information appears on the status
screen, your camera is on.
To Power Off:
Press and hold the Mode button [
beeps several times while the camera status lights flash.
Note: Fusion automatically powers off after 7 minutes of inactivity.
] for two seconds. The camera
15