Device Loopback Test - Honda SPX MVCI User Manual

Device Loopback Test

Select Device loopback test, press the ENTER button to start the
MVCI communication and analog circuit tests.
IMPORTANT: Do not run this test if the MVCI is being powered
through the vehicle cable. Run this test only when the MVCI is
powered by the AC power adapter.
The following screen appears.
When the test is complete, a pass or fail screen will display.
Press the ENTER button to view the test log fi le or press the ESC
button to return to the Hardware Test menu. If the test failed, contact
Technical Support.
61