Honda SPX MVCI User Manual page 23

Do one of the following:
• If you selected Peer-to-Peer, the Wireless Setup screen
showing the active Channel will appear. Continue to Step 2-c.
NOTE: Record the SSID for reference when you set up the
PC to communicate with the MVCI.
• If you selected Access Point, the Wireless Setup screen
showing the available networks will appear. Follow the screens
for one of the two possible options that may appear:
• If the Access Point is broadcasting an SSID, go to Step 2-b-1.
• If the Access Point is not broadcasting an SSID, go to Step 2-b-2.
2-b-1. From the Wireless Setup screen, scroll down to the bottom
of the screen to View & Connect to select from the available
network(s), press ENTER.
NOTE: Record the SSID of the network selected for
reference when you set up the PC to communicate with the
MVCI.
23