Ethernet
For most installations, the factory default settings should be used. The
following Ethernet setup is included if you require a unique Ethernet
setup due to the confi guration of your PC.
Connect the MVCI to the PC with an Ethernet Crossover cable (not
included).
1.
To change the Ethernet network settings, select Ethernet,
press the ENTER button.
2.
To change the IP Address, highlight the IP Address and press
the ENTER button.
Scroll up/down to change the number and left/right to move
between the components of the IP address. Press the ENTER
button to accept the changes, then press the ESC button to return
to the previous menu.
To return to the previous menu without accepting the changes,
press the ESC button.
45