Put On The Hearing Aid With Mould And Smartfit™ Trainer - oticon BTE13 SP Instructions For Use Manual

Put on the hearing aid with mould and SmartFit™
Trainer
Your hearing aid may have SmartFit™ Trainer, a guidance tool for
inserting the ear mould.
The LED indicator will remain on for up to 20 seconds while the system
checks the ear mould insertion and fit. If the ear mould is NOT inserted
correctly, a series of rapid blinks on the LED will appear.
If the blinks appear, turn the hearing aid off and on again, and reinsert
the ear mould.
It may not be possible to insert the ear mould without the rapid blinks
appearing. This is an indication that the ear mould may need replacing.
Your hearing care professional may enable or disable the SmartFit™
Trainer tool.
18 About Start up Handling Options Warnings More info