Control Panel Description; Menu Map; Dmx Linking - Chauvet Hurricane 2000 Quick Reference Manual

AC Power
This product has a fixed voltage power supply and it can work with an input voltage of either 120 VAC, 60 Hz or 230 VAC,
50 Hz, depending on the specific model.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Control Panel Description

BUTTON FUNCTION
<FUNCTION> Enters the programming mode
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<TIMER> Starts the timer controlled operation
< VOLUME> Controls the volume of the fog output, from 1-100%
<MANUAL> Manual fog output

Menu Map

MODE PROGRAMMING LEVELS DESCRIPTION
Interval Set
Duration Set
Timer Out
Volume Out
DMX Address
Fluid Sensor

DMX Linking

The Hurricane 2000 can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in DMX mode, the highest recommended DMX address is 512.
Hurricane 2000 QRG Rev. 1
QUICK REFERENCE GUIDE
1-200s Sets the interval between fog output
1-200s Sets the duration of the fog output
1-100% Sets the timer
1-100% Sets the fog volume
1-512 Selects the DMX starting address
ON
Turns the fluid sensor on/off
OFF
EN
2