Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PRDS 10-20V
Summary of Contents for Trotec PRDS 10-20V
- Page 1 PRDS 10-20V OPERATING MANUAL CORDLESS ROTARY HAMMER...
-
Page 2: Table Of Contents
Notice This signal word indicates important information (e.g. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Operating manual – cordless rotary hammer PRDS 10-20V... -
Page 3: Safety
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. electric shock. Operating manual – cordless rotary hammer PRDS 10-20V... - Page 4 The heat generated by the charger during charging entails a risk of fire. • Only use the charger for charging the battery. The charger must not be used as power supply for the power tool. Operating manual – cordless rotary hammer PRDS 10-20V...
- Page 5 We recommend using the power tool with original Trotec accessories. Protect yourself and others present from injuries caused by splintering and flying bits and pieces.
- Page 6 Do not immerse the device and the accessories in water. Make sure that no water or other liquids can enter the housing. Operating manual – cordless rotary hammer PRDS 10-20V...
-
Page 7: Information About The Device
The battery comes with its own battery level indication. As a device is at a standstill! Otherwise the device might be result you can check the current charging status without having damaged. to connect it to the device. Operating manual – cordless rotary hammer PRDS 10-20V... - Page 8 On/off switch Handle Battery Battery level indication Battery holder SDS drill bit Bits HSS drill bit SDS bit adapter Extension with magnetic bit holder Quick charger LED work lamp Dust protection cap Operating manual – cordless rotary hammer PRDS 10-20V...
-
Page 9: Transport And Storage
The supplied Li-ion batteries are subjects to the requirements of dangerous goods legislation. Sound pressure level L 82.38 dB(A) Sound power level L 93.38 dB(A) Uncertainty K 3 dB(A) Wear hearing protection. Excessive noise can lead to hearing loss. Operating manual – cordless rotary hammer PRDS 10-20V... -
Page 10: Start-Up
• dry and protected from frost and heat 1. Slide the battery (6) into the quick charger (12) upside • ambient temperature below 40 °C down. • protected from dust and direct sunlight inside the transport case Operating manual – cordless rotary hammer PRDS 10-20V... - Page 11 Orange – Red medium charge / power weak charge – Recharge the battery. 1. Press on the battery icon (18) on the battery (6). ð You can read the battery status from the battery level indication (6a). Operating manual – cordless rotary hammer PRDS 10-20V...
- Page 12 8. Push the lock (19) of the SDS adapter to the rear to remove the bit or the extension with magnetic bit holder (11). Info The SDS adapter and the extension with magnetic bit holder allow you to use commercially available bits. Operating manual – cordless rotary hammer PRDS 10-20V...
-
Page 13: Operation
• Use a drill bit suitable for masonry / bricks. Screwing: • When using screwdriver bits, always use a universal bit holder. Only use screwdriver bits that are suitable for the screw head. Operating manual – cordless rotary hammer PRDS 10-20V... - Page 14 Notice Only actuate the function selector switch when the device is at a standstill! Otherwise the device might be damaged. 1. Set the function selector switch (2) to the desired position. Operating manual – cordless rotary hammer PRDS 10-20V...
-
Page 15: Available Accessories
A wrong rotational direction may damage the tool and / or workpiece. 3. If required, set the switch for clockwise/counter-clockwise rotation (3) to centre position (lock) to block the on/off switch (4). Operating manual – cordless rotary hammer PRDS 10-20V... -
Page 16: Errors And Faults
Wait for at least 3 minutes after maintenance and • Check the quick charger for damages. Should the quick repair work. Only then switch the device back on. charger be damaged, stop using it. Contact the Trotec customer service. Your device still does not operate correctly after these checks? •... -
Page 17: Maintenance
SDS tool holder. • Keep the connecting terminals on the device and charger clean. • Clean the dust protection cap (14). For easier cleaning, you can remove the dust cap from the device. Operating manual – cordless rotary hammer PRDS 10-20V... - Page 18 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PRDS 10-20V and is the answer not in the manual?
Questions and answers