Pyramid TIMETRAX SYNC 7000 User Manual page 10

TIMETRAX™ SYNC 7000/7000BDL110 MASTER CONTROL
Installation Instructions
CLOCK CONNECTION
Using RJ45 BCD Cable, connect one end of the cable to the 7000 port labeled
1
DATA and route cable through cable channel located on the right side or bottom
of 7000 case.
Connect the other end of the RJ45 cable to port located on back of Analog or
2
Digital clock.
3
Mount and install wall clocks according to instructions included with clock.
9 CLOCK CONNECTION
SELECT
SET-UP INSTRUCTIONS
To change or set feature, After displayed feature is
1 3
press SELECT until desired changed, press SELECT to
feature is displayed.
24 VDC change other feature &
+ -
return to main display.
Use or to change
2
feature.
DATA POWER
1
2
pyramidtimesystem.com
888.479.7264