Messages & Counter Mode - Pyramid SMARTSITE 3550SS User Manual

SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3550SS/3600SS
CUSTOM MESSAGES (3600ss)
To program a custom message press
1
& press SELECT to choose "USE" custom message 1.
CUSTOM MESSAGE 1 displays on clock.
2
#USTOM MESSAGE 1
" # " sign (cursor) will blink over first character position. There are 16 positions
3
available for your custom message. Characters are alphanumeric (A-Z, blank,
<counter>, 0-9).
Scroll thru each character using
4
the next character.
Press SELECT after the 16th character. "CST MSG2=NOTUSED" will display on screen.
5
If a second custom message is not desired "CST MSG2=NOTUSED", press SELECT,
6
or to program a custom second message press
"CST MSG2=NOTUSED" menu & press SELECT to choose "USE" custom message 2.
Repeat steps 3 & 4.
7
Pressing SELECT after the 16
8
SET HOUR & SET MINUTES.
COUNTER MODE (3600ss)
To activate the counter mode, SELECT "<COUNTER>" in any position of either custom
message (see steps above).
An increasing number (1,2,3,-9999) will print on the second or third line each time
you print up to 3 seconds after "date stamp" or "custom message".
You may not move the cursor backwards. You must advance through all 16 character
1
positions to save the message.
It is recommended to reset time after creating custom messages.
2
pyramidtimesystems.com
s
(UP) or t(DOWN). Press SELECT to advance to
s
1
character advances to final menu options,
th
2
CUSTOM MESSAGES & COUNTER MODE
(UP) or t(DOWN) in "CST MSG1=NOTUSED" menu
(UP) or t(DOWN) in
s
7