Note:
Because JT600 would be reboot If you set some one mode. So sometimes, You couldn‟t get the prompt message("
operation success")
5.1.3.2 Data Uploading Interval
Example:
10 seconds
It means uploading position data every 10 sec.
0 it means uploading continuously. If you input 20 ,it means uploading 20 pieces of position data via SMS or
GPRS, and then stop data transmitting.
Before set the data uploading interval ,Please check the working mode you selected.
If working mode is GPRS standby/vibration/timing ,Data would be sent to the monitor center via GPRS.
If working mode is SMS standby/vibration/timing , Data would be sent to the SMS center via SMS.
Note:
If data is sent via SMS, We suggest the time interval should be more than 120 sec. and It‟s necessary to set the
SMS center number (primary SMS number) If you want to get position data by SMS.
5.1.4 Self Geo-fence/Geo-fence
5.1.4.1 Self Geo-fence
- 16 -